Artificial Lift Systems (ESP & Gas Lift)

Our Ration for the course : 4.7 Start Based on 56 users

ESP: pump performance curves, pump intake curves, typical problems, installation, troubleshooting ; Best practices for installation and maintenance;

Gas lift design: mandrels, valves injection gas requirements, temperature, chokes, spacing, equilibrium curve, continuous flow design;

Artificial lift screening;

Gas lift and ESP systems;

Reservoir performance, inflow & outflow relationships

Criteria for selection of artificial lift system;

Overview of artificial lift technology;

Economic analysis & limitations.

Safety Measures

Name of Course	Scheduled Dates	Vanue	Registration Link
Artificial Lift Systems (ESP & Gas Lift)	To be determined	Abu Dhabi, UAE	Registration Now

Introduction

Artificial lift is a method used to lower the producing bottomhole pressure (BHP) on the formation to obtain a higher production rate from the well. This can be done with a positive-displacement downhole pump, such as a beam pump or a progressive cavity pump (PCP), to lower the flowing pressure at the pump intake. It also can be done with a downhole centrifugal pump, which could be a part of an electrical submersible pump (ESP) system. A lower bottomhole flowing pressure and higher flow rate can be achieved with gas lift in which the density of the fluid in the tubing is lowered and expanding gas helps to lift the fluids. Artificial lift can be used to generate flow from a well in which no flow is occurring or used to increase the flow from a well to produce at a higher rate. Most oil wells require artificial lift at some point in the life of the field, and many gas wells benefit from artificial lift to take liquids off the formation so gas can flow at a higher rate

Course Objectives

Duration & Learning Level

Learning Level:

Intermediate

Duration:

3 days

Artificial Lift Systems (ESP & Gas Lift)

Upon completion of this course, participants will Learn how to:  - Make basic PVT properties and inflow performance calculations related to artificial lift;  - Apply multiphase tubing & pipe flow principles  - Select the appropriate artificial lift system;  - Compare systems to determine what system is most economically feasible  - Specify components and auxiliary equipment needed for each system  - Apply basic design and analysis concepts The course will cover the following: - Overview of artificial lift technology; - Criteria for selection of artificial lift system; - Reservoir performance, inflow & outflow relationships - Artificial lift screening; - Gas lift and ESP systems; - Gas lift design: mandrels, valves injection gas requirements, temperature, chokes, spacing, equilibrium curve, continuous flow design; - ESP: pump performance curves, pump intake curves, typical problems, installation, troubleshooting ; Best practices for installation and maintenance; - Economic analysis & limitations. - Safety Measures

Exam & Certificate

Completion Certificate will be awarded after the training

Target Group

Off-shore Operators, field operators and technicians, New Petroleum engineers, Plant engineers and all other company staff involved in artificial lift operations

1. How do I enroll/register for the training course?

To enroll or register to any training course, you can use the registration page from training page or fill the request a call back form from each course pages. The following page will provide you a list of course and training that we are providing based on the category and from each course item you can see the course details.
URL: https://nbizinfosol.twtests.co.in/training.aspx
Another method is to fill a Request a call back form provided in each Training/Course pages.